The Port of Skagen, also Skagen Harbour, (Danish: Skagen Havn) is located in Skagen, northern Denmark. The country's leading fishing port consists of an industrial harbour that supports the area's fishing industry as well as facilities for cruise ships. It also has a shipyard and fish-processing facilities. The harbour's marina is open to visitors during the summer months.
The fishing harbour was built between 1904 and 1907, with inner and outer sections established under the supervision of hydraulic engineer Palle Bruun. The official inauguration was on 20 November 1907. The distinctive warehouses next to the harbour were designed by Thorvald Bindesbøll, and opened in May 1908. In 1932, on the occasion of the harbour's 25th anniversary, Anne Marie Carl-Nielsen's statue of the fisherman and lifeboatman was unveiled. The harbour was expanded to the east between 1935 and 1938, and in the 1950s an 11 million krone (kr) expansion took place to the west, increasing the off-shore area by 70,000 square metres (750,000 sq ft) and the on-shore area by 90,000 square metres (970,000 sq ft). Between 1964 and 1979 the harbour was further expanded towards the east in a 35 million kr project to facilitate growth at the port, doubling the size of the harbour and providing new facilities for auctioning the catches from the 400 fishing boats registered in Skagen. (Full article...)
Image 9Tunnels, such as the Tampere Tunnel, allow traffic to pass underground or through rock formations. (from Transport)
Image 10Map of world railway network as of 2022 (from Rail transport)
Image 11The Beijing Subway is one of the world's largest and busiest rapid transit networks. (from Transport)
Image 12A 16th-century minecart, an early example of unpowered rail transport (from Rail transport)
Image 13The Great North Road near High gate on the approach to London before turnpiking. The highway was deeply rutted and spread onto adjoining land. (from Road transport)
Image 16Bulk cargo of minerals on a train (from Rail transport)
Image 17A cast iron fishbelly edge rail manufactured by Outram at the Butterley Company for the Cromford and High Peak Railway in 1831; these are smooth edge rails for wheels with flanges. (from Rail transport)
Image 22According to Eurostat and the European Railway Agency, the fatality risk for passengers and occupants on European railways is 28 times lower when compared with car usage (based on data by EU-27 member nations, 2008–2010). (from Rail transport)
Image 23Arizona - North America - Southwest - Interstate Highway System (4893585908) (from Road transport)
Image 45Bardon Hill box in England (seen here in 2009) is a Midland Railway box dating from 1899, although the original mechanical lever frame has been replaced by electrical switches. (from Rail transport)
Image 50A replica of a "Little Eaton Tramway" wagon; the tracks are plateways. (from Rail transport)
Image 51The Lockheed SR-71 remains unsurpassed in many areas of performance. (from Aviation)
Image 52German soldiers in a railway car on the way to the front in August 1914. The message on the car reads Von München über Metz nach Paris ("From Munich via Metz to Paris"). (from Rail transport)
Image 53European rail subsidies in euros per passenger-km for 2008 (from Rail transport)
Image 55Customized motorcycle to maximize load capacity. Mobility is important for motorcycles, which are primarily used for transporting light cargo in urban areas. (from Transport)
Image 56The Cessna 172 is the most produced aircraft in history (from Aviation)
A roundhouse is a building used by railroads for servicing locomotives. Roundhouses are large, circular or semicircular structures that were traditionally located surrounding or adjacent to turntables. The defining feature of the traditional roundhouse was the turntable, which facilitates access when the building is used for repair facilities or for storage of steam locomotives. Early steam locomotives normally travelled forwards only; although reverse operations capabilities were soon built into locomotive mechanisms, the controls were normally optimized for forward travel, and the locomotives often could not operate as well in reverse. Some passenger cars, such as observation cars, were also designed as late as the 1960s for operations in a particular direction. A turntable allowed a locomotive or other rolling stock to be turned around for the return journey.
... that a section of Mississippi Highway 489 was designated as the Jason Boyd Memorial Highway to commemorate the MDOT superintendent who was killed while removing debris from the road?